Dji Phantom 2 Vision Compass Error Maintenance Required
Let us calibrate. Let us avoid. Let Us Drone. Calibrating the compass on your DJI Spark is very important to do as your drone needs to know which direction it is facing. First, let's look at how to calibrate the compass.
To calibrate the compass on a Spark, follow these five steps:
- Tap on settings>MC settings>advanced settings>sensors>compass.
- At the bottom, you will see "calibrate". Tap on that.
- When prompted by the app, hold the aircraft horizontally and rotate 360 degrees. The status indicator lights should turn green.
- Now hold the aircraft vertically with the nose pointing down and rotate 360 degrees.
- If the status indicator lights turn red at any point, the calibration has failed. Move to a different location and try again.
This subject gets brought up so frequently because of how important it is to take-off and fly without compass errors, but how often do you really need to calibrate it? Let's dive into what the compass does, common errors, and when you should calibrate.
When should you calibrate the compass on Spark?
If you have been around the drone scene for a few years then you have certainly heard many different answers to this question. Some say that you should calibrate the compass before every flight, while others say that that's unnecessary, or downright ludicrous. Most of us agree that it is smart to calibrate your compass when initially setting up your drone for the first time.
DJI recommends that you calibrate the Spark's compass when the DJI GO 4 app or status indicator lights prompt you to do so.
People recommend that you calibrate the compass on the Spark when you travel a distance away from the last spot you flew. How far of a distance, exactly? Some say more than thirty miles, while others say fifty, and still, others say one hundred miles from the last spot you flew. DJI does not discuss this in the Spark manual, which I find interesting as they do in manuals of other drone models.
Now, is it going to hurt your Spark if you calibrate it more often than necessary? No, it shouldn't, but it's also not necessary. Some say that you run the risk of throwing something out of whack when you calibrate a drone more frequently than DJI's suggests to.
I have to say that my wife (Hailey) and I just did a road trip across the country and I did quite a bit of drone flying. Knowing full well that it's recommended to calibrate the compass if you're traveling, I decided to conduct a little test. I was only going to calibrate my drone if I got an error in the DJI GO 4 app.
After traveling for almost 3900 miles without not one compass calibration, I had not one compass error while flying. Granted, I didn't take off near any large metal objects, but still, I was impressed. Was this a responsible test that I conducted? Eh, probably not, but I was curious as to what would happen while constantly flying in a new location for about two weeks straight.
Related questions
Should you also calibrate the IMU while calibrating the compass? You have likely seen a few comments about the importance of calibrating the IMU on your drone. To find out how to do this, check out my post-DJI Drone IMU Calibration: When and How You Should Do It.
Should you get DJI's Care Refresh with your new drone? Learning how to fly a drone can be an intimidating endeavor, and buying an extended warranty may be wise for some. I cover in detail DJI's Care Refresh in this post-DJI Care Refresh: The Ultimate 2019 Guide.
What is the role of the compass?
The compass gives the drone
Why is this important while flying your Spark? Imagine that you are flying along and the drone suddenly loses connection from your RC. When the drone commences its RTH sequence, you're going to have some issues if the drone thinks that north is actually south.
Your Spark uses GPS and the compass when performing an RTH operation, but the bird will get conflicting information from these two systems if it doesn't know which way it's going.
What objects cause compass interference for your Spark?
When calibrating the compass, it is extremely important to do so in an open area, free of obstruction. So, what kind of objects may cause compass calibration errors?
Ferromagnetic materials, such as nickel, iron, and cobalt should be avoided. DJI mentions that cell phones often have ferromagnetic materials in them, and they suggest that you don't carry them in your pocket when calibrating the drone. I find this interesting that DJI specifically mentions cell phones, because, well, we have to use our cell phones (or tablets) to perform the calibration process. I guess they are saying "don't have three extra phones hanging out near the drone during the compass calibration, bud".
If you want to be overly cautious about the cell phone thing, you can have someone hold the RC with the phone/tablet while you have the drone about 10 feet away, or you can set the drone on the ground and walk over to it when you tap "calibrate" in the app.
Here's a list of other objects that should be avoided while performing the calibration. Understand that this isn't a complete list, but it contains some of the most common objects we encounter in our environment.
- Large metal structures
- Rebar (this may be an easy one to not realize you're close to)
- Parking structures
- Steel reinforced basements
- Cars
- Bridges (I attempted to calibrate in the middle of a very large bridge once. It didn't go well. I never did perform a successful calibration.)
- Scaffolding
- Any electromagnetic fields
An area of discussion that doesn't seem to have a conclusive answer is smart-watches. Does that Apple or Samsung watch that you're wearing cause interference? Some people claim that their smart-watch makes a difference, while other's say that this is nonsense.
I wear a Garmin watch, which is technically a smart-watch, but in a class where the Apple watch gets straight A's, the Garmin is more of a C kind of student. I don't seem to have any compass issues with my C average watch.
I'd say that if you want to be on the safe side, take off the smart watch. It would also be smart to perform a test to see if the watch causes problems.
You can actually see if the compass has any interference before you calibrate
There have been so many discussions on where the best location is to calibrate the compass on a drone, and the truth of the matter is that it will be difficult to truly escape all forms of interference when you're in an urban environment.
People have joked that the best spot to calibrate the compass on your drone is in the middle of a
Calibrate, or just move?
Something that I should note is that calibrating the compass near an object that is causing interference will not simply make the errors disappear.
It may be tempting to see a compass error on the GO 4 app and immediately think that the remedy is to calibrate it. Don't do this. You are likely just too close to some metal object and the proper course of action would be to move a few feet away and see if the errors go away.
Calibrating a compass that is already calibrated and in good working order only gives the drones compass an opportunity to get worse, not better.
In-flight signs that you should calibrate the Spark's compass
If you are cruising around with your Spark and the drone suddenly enters ATTI mode, there is a good chance that this is because of a compass or GPS problem.
You may also experience the "toilet bowl" effect, which is when the drone starts spinning on its axis instead of keeping its nose facing forward as it should.
You may get a notification in the DJI GO 4 app while flying that lets you know there is compass interference, but this doesn't always happen. I was having problems with my drone a while back that we're a bit confusing at the time.
I would be flying along with 18+ satellites and I would suddenly get an error that the drone lost GPS and was now entering ATTI mode. This was extremely frustrating as it would happen at the most random times, usually when I least expected it. In fact, I remember thinking that I would for sure lose GPS on one occasion when I only had 8 satellites. To my surprise, the drone remained in P-mode for the entire flight.
This was frustrating conundrum because I didn't have much faith in the consistency of my drone, and I was alway on guard thinking that the AC would go into ATTI mode at any moment.
When I started calibrating my drone on a more regular basis I noticed that this occurence would happen less often. Even if I didn't get a compass error, I would calibrate it and wouldn't lose GPS while flying as often. Does it still happen occasionally? Sure, but probably because I live in San Diego and it's difficult to escape all forms of interference when in or near a large city.
If your Spark does enter ATTI mode while you're out flying, immediately panic! No, I'm totally kidding…panicking is the last thing you should do. When a drone is in ATTI (attitude) mode, you will need to fly it manually as GPS is not available. The drone will maintain its altitude but will drift with any wind.
This is a good reason to not fly too far from your location if you have a weak GPS signal or are getting compass errors. If the drone is just a tiny
If you lose GPS and happen to have the aircraft disconnect due to signal loss, you're going to be in a lot of trouble as the drone will have no clue how to return to home. If you're newer to flying or would like a refresher, I would strongly recommend reading Drone Flyaways: 14 ways to Prevent Them, and Best 17 Drone Flying Tips for Every DJI Beginner.
One last note about ATTI mode. I can guarantee with almost complete certainty that there will come a time when you have to fly in ATTI mode unexpectantly. To prepare yourself for this, you have a couple of options. If you own a Phantom or Inspire, you can toggle ATTI mode on the controller. I would recommend practicing in ATTI mode while you're in an open area with a lot of room for error. It's not easy at first, but every seasoned drone pilot has a working knowledge of
If you don't have a drone that allows you to manually enter ATTI mode, you may want to buy a cheap drone that will behave like a drone in ATTI mode, as this experience will go a long way in preparing you for the occasion when your Spark loses GPS.
How to check if there are compass errors on your Spark
Before you fly, the GO 4 app may display a compass error. If this is the case, follow the instructions listed at the beginning of this post and calibrate the compass in an area with no interference.Remember, there is a difference between the app telling you to calibrate the compass and that there is magnetic interference nearby. If the app is just letting you know that there is interference, move locations and see if the warning disappears.
Here is an example of the DJI GO 4 app telling me to calibrate the compass.
And here is an example of the DJI GO 4 app telling me that I need to try taking off from a different location and that there may be metal or magnetic objects nearby.
You may also get a compass error while you are flying. If this is the case, I'd strongly recommend landing as soon as you can and proceed with calibrating the compass.
Alternating red and yellow blinking lights on the aircraft also indicate that a compass calibration is needed.
If you continue to get compass errors despite trying to calibrate in multiple areas, I'd recommend trying this course of action:
1- Check for any firmware updates. Just remember that firmware updates are often large so complete the update when you are near Wi-Fi.
2- If all firmware is updated and you are still getting compass errors, I'd try deleting and re-installing the DJI GO 4 app. In theory, this wouldn't rectify the problem because the compass is on the drone itself and not the GO 4 app, but there's a chance that the compass is completely fine and the app is just displaying unfounded errors.
Detailed Spark compass calibration steps
So if after changing locations the app is still prompting you to calibrate the compass, it's time to go through the calibration process. The five steps listed in the beginning are the main points, but here is where we get into the step-by-step instructions.
Step #1- Bring your drone, remote controller and phone or tablet to an open area free of metal or magnetic objects.
Step #2- Power on the RC, then the drone.
Step #3- Tap on settings in the upper righthand corner.
Step #4- Tap on main controller settings in the top left.
Step #5- Scroll down and tap advanced settings at the bottom.
Step #6- Tap on sensors.
Step #7- Toggle over to Compass at the top.
Step #8- Tap on calibrate compass at the bottom.
Step #9- Press start when prompted.
Step #10- Begin the calibration by rotating the drone horizontally in a counterclockwise direction, parallel with the ground. You can stop when the status indicator lights flash green.
Step #11- Next, rotate the drone on its side and rotate the aircraft 360 degrees vertically in a counterclockwise direction. Again, you can stop when the status indicator lights turn green.
Step #12- Congrats, you've successfully calibrated the drone's compass! If the compass errors don't disappear, move locations and try to re-calibrate.
Trevor's Take
You know, sometimes I just wish that nothing had to be calibrated on my drones and I could just whip them out wherever and whenever I wanted, but that's not technology. The amount of engineering that has gone into making these drones operate as well as they do is astounding. Really, this is what has set DJI apart from the rest. They've managed to put the best technology and engineering into their drones at an affordable price point. When you cram that much technology into a flying device that fits in the palm of your hand, it's asinine to think that the aircraft will fly perfect one hundred percent of the time without any maintenance (calibration).
Have you had any compass errors on your Spark? What was your experience and were you able to resolve the issues? I'd love to hear about it in the comment section below!
Dji Phantom 2 Vision Compass Error Maintenance Required
Source: https://www.letusdrone.com/fix-compass-errors-on-your-dji-spark/
0 Response to "Dji Phantom 2 Vision Compass Error Maintenance Required"
Post a Comment